Cleaning Your Slip Resistance Tiles after Installation

Cleaning Your Slip Resistance Tiles after Installation

Today, improving and beautifying a place can be done easily. There are now so many options to choose from in order to achieve the desired look and feel. What is more interesting is the fact that it can be done in the most functional way.

If you want a better look and make your floors more functional, then it is a must to choose the best option available today. Slip resistance tiles are widely used today in difference spaces and scenarios because of the numerous benefits they have to offer. However, it is a must to keep in mind that for you to make the most out of it, you should know proper ways of maintaining and cleaning them especially after installation. Below are some of the most important things you need to know.

Post-Tile Installation

In order to achieve complete satisfaction with your chosen slip resistance tiles after installing them, it would be best to follow the most suitable cleaning methods, cleaning schedules, as well as chemicals to use. Here is a step by step guide on how to clean the tiles post production. The information below are application in residential purposes. This will help ensure that the tiles are thoroughly cleaned after they have been installed to avoid grime and dust buildup and to have a standard for future tile maintenance.

Step 1

Make sure to thoroughly sweep the floor so that all surface matters will be removed.

Step 2

Any bulk surface material like adhesive, cement, plaster, or paint should be removed with a scraper or any tool that has a bladed edge.

Step 3

The mop bucket should be cleaned. Prepare a mixture of 8-6 parts of hot water and a part of phosphoric acid based cleaner. Make sure to mix it well.

Step 4

Before scrubbing or deck brushing, the wet floor signs should be placed where they can be easily seen. Also, inform everyone in the facility that you are cleaning the floor.

Step 5

Generously apply the mixed solution to the floor. Then leave it for 1-2 minutes and agitate the surface with the use of a decking brush or scrubbing machine until all cement, plaster, and any lime-based contaminant on the surface are removed. No solution should be left to dry on the surface. Just apply enough amount that can be easily managed.

Step 6

The remaining liquid should be mopped with a clean hot water. When doing this, caution should be taken to make sure that the acid cleaner will be splashed on the surface to avoid damage.

Step 7

Wash the floor using a neutral cleaner. Do this twice to neutralize and clean up any residue.

These are very simple steps but when applied properly, you can be confident that your tiles will last for the longest time possible and you can enjoy all the benefits they have to offer.


non slip outdoor tiles