Cleaning Your Slip Resistance Tiles after Installation

Cleaning Your Slip Resistance Tiles after Installation

Today, improving and beautifying a place can be done easily. There are now so many options to choose from in order to achieve the desired look and feel. What is more interesting is the fact that it can be done in the most functional way.

If you want a better look and make your floors more functional, then it is a must to choose the best option available today. Slip resistance tiles are widely used today in difference spaces and scenarios because of the numerous benefits they have to offer. However, it is a must to keep in mind that for you to make the most out of it, you should know proper ways of maintaining and cleaning them especially after installation. Below are some of the most important things you need to know.

Post-Tile Installation

In order to achieve complete satisfaction with your chosen slip resistance tiles after installing them, it would be best to follow the most suitable cleaning methods, cleaning schedules, as well as chemicals to use. Here is a step by step guide on how to clean the tiles post production. The information below are application in residential purposes. This will help ensure that the tiles are thoroughly cleaned after they have been installed to avoid grime and dust buildup and to have a standard for future tile maintenance.

Step 1

Make sure to thoroughly sweep the floor so that all surface matters will be removed.

Step 2

Any bulk surface material like adhesive, cement, plaster, or paint should be removed with a scraper or any tool that has a bladed edge.

Step 3

The mop bucket should be cleaned. Prepare a mixture of 8-6 parts of hot water and a part of phosphoric acid based cleaner. Make sure to mix it well.

Step 4

Before scrubbing or deck brushing, the wet floor signs should be placed where they can be easily seen. Also, inform everyone in the facility that you are cleaning the floor.

Step 5

Generously apply the mixed solution to the floor. Then leave it for 1-2 minutes and agitate the surface with the use of a decking brush or scrubbing machine until all cement, plaster, and any lime-based contaminant on the surface are removed. No solution should be left to dry on the surface. Just apply enough amount that can be easily managed.

Step 6

The remaining liquid should be mopped with a clean hot water. When doing this, caution should be taken to make sure that the acid cleaner will be splashed on the surface to avoid damage.

Step 7

Wash the floor using a neutral cleaner. Do this twice to neutralize and clean up any residue.

These are very simple steps but when applied properly, you can be confident that your tiles will last for the longest time possible and you can enjoy all the benefits they have to offer.

Related:

non slip outdoor tiles

Industrial Design Firm Australia: How to Successfully Collaborate with One?

So, you have already interviewed and evaluated a potential industrial design firm in Australia to work with on your next project. As a client, it is important to make sure that working with the team will ensure successful results, especially that you are investing your money and time into the partnership. The team that you have chosen should be able to deliver the best value and meet all your needs. Below are some factors that will ensure that your relationship is always on the right track.

Clearly Communicate Your Strategy in Product Marketing

Make sure that your share information about your business, products, and marketing strategies you’re your chosen industrial design firm in Australia. Do this at the start of your partnership and if there are changes, communicate them as they happen. Having an adequate understanding of your product, business, and the market will help them to innovate and decide better throughout your partnership.

 

Understand your Target Market’s Needs and Wants

It is important for you to find out how your target market thinks, how they engage with your products, and what you can do to improve their user-experience so they will purchase your product. The knowledge gap between your target market and design team can be solved by applying a systematic usability technique during the design and development phase of your product.

 

Accept Uncertainties, but Actively Participate as your Product Unfolds

At the beginning of the project, you can expect that only a few details will be revealed. This means that the estimate of the design company will be subject to some uncertainties. As they engage in the project and their efforts to develop the product matures, more knowledge is acquired and the uncertainties eventually decrease.

 

Engage in the Partnership

Maintaining a good relationship with your design company is of great importance. This makes everything a lot easier as you are comfortable with each other. In order for the relationship to be effective, both sides need to embrace open communication and should give and receive honest, frequent, and transparent feedback to avoid any unpleasant surprises.

To make sure that it is off to a good start, you, as the client need to be prepared to set your ideas free and transition from daily involvement in the details to supporting the design company as they execute these details. You need to communicate your need at a requirement level instead of how it should be done at an implementation level. You should identify and understand the primary decision-makers and see to it that the design firm company knows who they are.

The design team and the client should work together to achieve results that are innovative and successful. More is likely to be achieved when more people work for it. By keeping in mind these factors, you will be ready to successfully bring your product in the market with the help of a multi-disciplinary and well-functioning team.

Protect your Company Assets with Non Slip Flooring

If you have a company, one of your main goals is to protect your assets. But what are these assets? Are these your clients? Or the stocks that you have? Or the money and holdings you have? Well, the answer is none of the above. Your most important assets are your customers and staff, especially if you are in the service industry. Given this, it is a must to protect their well-being. Otherwise, losing them can have negative ramifications for the business.

Without the best people that can help you will lead you to lose a lot of money and time as a result of unproductivity. Also, having no proper indemnity clauses for them is likely to end up in lawsuits in case they acquire injuries while at work. Such problems can be too difficult to face when they happen. But the good thing is, you can do something to prevent them from happening. One of the best solutions is to have non slip flooring in the workplace.

More so if you have a business that deals with clients on a daily basis, you should make it a priority that your premises are safe, not only to protect your clients but your reputation as well. So, here is how this flooring option can help you.

 

Benefits of Non Slip Floors

Having a non slip flooring in the business can greatly help the business in all aspects, especially when it comes to injuries resulting from slip and falls. One can break bones or incur other injuries simply because of bad flooring and this is something that you do not want to happen to anyone. Taking safety precautions is one best way to spare yourself from this dilemma. Installing non slip floors can help guarantee that no untoward events will take place.

In terms of installation, this kind of flooring is not like the traditional types of floors. For such, you just have to apply the coating on top of your existing floor. Then let it dry and neutralize. If you cannot do this on your own, you can hire professionals to help you with it.

The non slip coating helps prevent any static friction on the floor surface. This means that is will never be possible for the user to lose footing and fall. This is one of the simplest yet effective defense mechanisms that you can employ to protect everyone in the workplace. Also, it will only take like seven minutes for the coating to dry and another two minutes for it to neutralize. The installation process is definitely quick, easy, and painless. It will not be taking up a lot of your time so everyone can still function as normal in the workplace.